25+ yearsUmbrella Parking Shades · Saudi Arabia

Cobra Car Parking Shades in Saudi Arabia

Our cobra car parking shades sweep over your parked cars from a single line of columns, with a curved steel arm that rises and bends forward like a cobra’s raised head. You get open bays with no front posts and a car park that people remember. At Umbrella Parking Shades we design, fabricate and install every cobra shade ourselves from Dammam, and our cobra model already shades more than 300 cars at Lina Municipality.

  • Saudi Aramco vendor 10114822
  • 25+ years in KSA
  • All 13 regions
Get a free quote

Tell us your site details — we call you back on phone or WhatsApp.

Your details are only used to prepare your quotation.

Specifications

Cobra Car Parking Shades — key specifications

FeatureDetails
Structure typeCurved cantilever (cobra): one column line with curved arms carrying the fabric over the bays; single-sided or back-to-back
SteelMS (mild steel, painted), GI (galvanised iron) or hot-dip galvanised steel; arms rolled and fabricated to profile in our Dammam workshop
Fabric optionsPVC-coated polyester, PTFE fibreglass membrane, HDPE knitted fabric; GRP
Standard bay sizes6.0 × 3.0 m (one car), 6.0 × 6.0 m (two cars, back-to-back), 2.5 m clear height as standard; custom to your site
Colours12: white, cream, green, dark green, grey, dark grey, orange, yellow, black, red, blue, dark blue
Typical usesMunicipal and government buildings, hotels, hospitals, corporate headquarters, malls, landmark car parks
Wind and sandColumn, arm and foundation engineered for SBC 301 wind loads, Shamal winds and sand at your site
Warranty10 years on the steel structure; 5–10 years on the fabric depending on type
Lead time10–20 bays: about 2–4 weeks including ~7 days footing cure; large car parks phased, about 4–8+ weeks
Price guideQuoted per project after a free site survey: a written quotation with no hidden costs
Installation timeVilla 1–2 cars: 1–2 days on site · 10–20 bays: about 2–4 weeks including footing cure

01

A cobra car parking shade gives your frontage a signature look

Cobra Car Parking Shades in Saudi Arabia by Umbrella Parking Shades — photo 7
Cobra Car Parking Shades · Umbrella Parking Shades

A cobra shade is a cantilever: we hold the roof from one side only, so the front of each bay stays open. The difference is the arm. Instead of a straight beam, each column carries a curved, tapering arm that climbs from the column and arcs forward over the cars. We tension the fabric along these arms, so your roof becomes one sweeping curve.

For you, that means two things at once: easy, post-free parking for every driver, and a frontage that gives your building a strong identity. For our straight one-sided designs, see cantilever car parking shades; to compare every structure, see types of car parking shades.

Cobra layouts we build

  • Single cobra: one row of bays covered from a column line at the back, ideal against a wall, fence or landscaped strip.
  • Double (back-to-back) cobra: arms reach out on both sides of one column line and cover two rows with very few columns, the curved cousin of our double cantilever car parking shades.

02

What you get with Umbrella Parking Shades

  • Free site visit: we measure your car park, check underground services and advise on layout, fabric and colour.
  • Drawing and quotation first: a layout drawing and a clear written quotation before you pay anything.
  • Matched curves, row after row: every arm is rolled in our Dammam workshop and checked against a master template, so your whole row lines up perfectly.
  • Our own crews: installation by our teams, with no subcontractors, anywhere in the Kingdom.
  • Warranty: 10 years on the steel structure and 5–10 years on the fabric.
  • Balady permit support: we prepare the shade drawings and work with a licensed engineering office to file the permit where your site needs one.
  • Maintenance plans: yearly plans covering joint checks, re-tensioning and fabric replacement.

03

Why our clients choose the cobra design

Cobra Car Parking Shades in Saudi Arabia by Umbrella Parking Shades — photo 8
Cobra Car Parking Shades · Umbrella Parking Shades
  • No posts at the front of the bay: drivers swing in without dodging columns, and doors open freely.
  • A landmark look: the curved arms give your frontage a strong identity, which is why municipalities, hotels and headquarters choose it.
  • Fewer columns: a back-to-back cobra covers two rows from one column line, leaving space for kerbs, lighting and landscaping.
  • Smooth drainage: the curve guides rainwater and sand toward one edge instead of letting it pool.

What we tell you honestly: a cantilever puts a large turning force on its column and foundation, so a cobra needs deeper reinforced concrete footings and more steel than a pyramid or two-sided arch. It costs somewhat more per bay than a pyramid. That is exactly why our engineers calculate every footing properly instead of guessing.

04

Where a cobra shade adds the most value

  • Municipalities and government buildings, like our project for Lina Municipality, where a public building needs a dignified, durable car park.
  • Hotels and resorts in Taif, Jeddah and Al Khobar, for guest arrival and valet parking.
  • Hospitals in Riyadh and the Eastern Province, where open bay fronts help patients get in and out of cars.
  • Corporate headquarters and banks in Riyadh, Dammam and Dhahran.

We match the specification to your city. On the Gulf coast at Dammam and Jubail, and on the Red Sea at Jeddah and Yanbu, humid salty air makes hot-dip galvanised steel the right choice. In Riyadh and the northern cities, open-desert wind decides the size of the column and footing, and we design for it.

05

How we deliver your cobra shade

Cobra Car Parking Shades in Saudi Arabia by Umbrella Parking Shades — photo 9
Cobra Car Parking Shades · Umbrella Parking Shades
  1. Free survey. We measure your car park, check what is underground at the column positions, and confirm soil conditions and vehicle sizes.
  2. Engineering and quotation. Because the cobra is a cantilever, our engineers pay special attention to the column, the arm-to-column connection and the concrete footing with its anchor bolts, all calculated for your bay depth and wind exposure. You approve the layout drawing and written quotation.
  3. Fabrication. In our Dammam workshop each arm is rolled, shaped, checked against the master template and finished in your chosen steel treatment. Fabric panels are cut to the curve.
  4. Installation. Our crews cast the footings and let the concrete cure, erect and align the columns and arms, then tension the fabric.
  5. Permit and handover. Where needed, we prepare the shade drawings for the Balady permit with a licensed engineering office, and we hand over with warranty and care details.

06

Fabric and colour that show off the curve

  • PVC is what most of our cobra clients choose: a waterproof, full-shade roof with a smooth finish that shows the curve clearly.
  • PTFE suits prestige buildings that want a premium, long-life membrane (25+ years typical); we quote it per project.
  • HDPE is the most economical fabric: lighter and breathable, it keeps the area cooler at a lower cost, but lets some light and rain through.

On a cobra, both steel and fabric are on display. White or cream fabric with grey or white steel looks clean on government and hospital buildings; a brand colour such as blue or green works well for corporate sites.

07

Simple care that protects your investment

Cobra Car Parking Shades in Saudi Arabia by Umbrella Parking Shades — photo 10
Cobra Car Parking Shades · Umbrella Parking Shades
  • Rinse the fabric regularly, especially light colours.
  • Check the arm-to-column joints and the column base plates once a year; this is where a cantilever’s loads concentrate.
  • Re-tension the fabric after the Shamal season so it does not flap.
  • Near the coast, repair any chipped coating on the steel straight away.

Our annual maintenance plans take care of all four for you.

08

We install cobra shades across Saudi Arabia

We are based in Dammam (King Saud St, Al Faiha, 32441; open Saturday to Thursday, 7 am to 10 pm) and our crews install cobra shades in every region, including Al Khobar, Dhahran, Jubail, Riyadh, Jeddah, Makkah, Madinah, Taif, Yanbu, Jazan, Tabuk and the Northern Borders. See every region on our car parking shades in Saudi Arabia page.

09

Our cobra work and the clients behind it

Cobra Car Parking Shades in Saudi Arabia by Umbrella Parking Shades — photo 11
Cobra Car Parking Shades · Umbrella Parking Shades
  • Lina Municipality: cobra car parking shades covering 300+ cars at the municipal car park.

With 25+ years in the Kingdom, we are a Saudi Aramco approved vendor (Vendor ID 10114822) and a STAR Verified Contractor. Our other projects include InterContinental Hotel Taif, King Abdulaziz Specialist Hospital and the Prince Sultan Cultural Center in Jeddah (100 cars).

10

What shapes the price of your cobra car parking shades

We break down your quotation so you see exactly what you are paying for

  • Arm length and bay depth: a longer reach means a heavier arm, column and footing.
  • Single or back-to-back: a double cobra shares one column line, so it often costs less per bay.
  • Foundation: soil conditions and footing size are a bigger share of the cost than on other models.
  • Fabric: HDPE is the most economical, PVC costs more but is waterproof, and PTFE is the premium option.
  • Steel finish: hot-dip galvanising for coastal sites; optional colour coating.
  • Number of bays and location: larger car parks get volume pricing; distance from Dammam affects logistics.

Project photos

Cobra Car Parking Shades — our work in pictures

Real cobra car parking shades built and installed by Umbrella Parking Shades in Saudi Arabia. Tap a photo to enlarge it.

FAQ

Cobra Car Parking Shades: frequently asked questions

Both hold the roof from one side and leave the front of the bays open. Our normal cantilever uses straight beams, while the cobra uses curved arms that rise and bend forward, giving your roof a sweeping profile. The cobra is more decorative and usually costs a little more.

Because the whole roof hangs from one side, wind and weight try to tip the column over. We resist that turning force with a deep reinforced concrete footing and anchor bolts, sized by our engineers for your bay depth and SBC 301 wind loads at your site.

We set the spacing during design, based on arm length, fabric and wind exposure, and your layout drawing shows the exact count before you commit. A back-to-back cobra covers bays on both sides of each column, so it needs far fewer columns per car.

It can be, if you want an open driveway with no posts at the front and a striking look. For one or two cars, a cantilever or pyramid usually costs less. After a free visit we are happy to send you a written quotation for both options.

Our cobra car parking shades cover 300+ cars at Lina Municipality. Ask us for more references when you enquire.

Usually, yes. We cut the paving at the column positions, cast new footings and reinstate the surface. Our free survey checks for buried cables and pipes before any work starts.

For a row of 10–20 bays, plan on about 2–4 weeks, including roughly 7 days for the footings to cure. Larger car parks are phased over about 4–8+ weeks so part of your parking stays in use.

Free site survey & quotation

Ready to start your cobra car parking shades project?

Send your location and number of cars on WhatsApp, or call us. Umbrella Parking Shades will visit your site and send a layout with the quotation.