Arch Design Car Parking Shades in Saudi Arabia
Our arch design car parking shades use curved steel arches to carry one continuous, barrel-shaped fabric roof along your whole row of parking bays. You get a long, clean, modern roofline that sheds rain and sand and keeps every car in shade. At Umbrella Parking Shades we roll the arches in our own Dammam workshop and our crews install them across the Kingdom for company car parks, hospitals, schools and covered walkways.
- Saudi Aramco vendor 10114822
- 25+ years in KSA
- All 13 regions
Tell us your site details — we call you back on phone or WhatsApp.
Specifications
Arch Design Car Parking Shades — key specifications
| Feature | Details |
|---|---|
| Structure type | Barrel-vault arch: curved steel arches at regular spacing, fabric tensioned over them along the row, on columns |
| Steel | MS (mild steel, painted), GI (galvanised iron) or hot-dip galvanised steel; arches rolled to radius in our workshop |
| Fabric options | PVC-coated polyester, HDPE knitted fabric, PTFE fibreglass membrane; GRP |
| Standard bay sizes | 6.0 × 3.0 m (one car), 6.0 × 6.0 m (two cars), 2.5 m clear height as standard; run length to suit your site |
| Colours | 12: white, cream, green, dark green, grey, dark grey, orange, yellow, black, red, blue, dark blue |
| Typical uses | Long staff car parks, hospital and university parking, covered walkways, bus and drop-off bays |
| Wind and sand | Curved, tensioned fabric resists flutter and sheds sand; columns, arches and footings engineered for SBC 301 wind loads and Shamal winds |
| Warranty | 10 years on the steel structure; 5–10 years on the fabric depending on type |
| Lead time | 10–20 bays: about 2–4 weeks including ~7 days footing cure; long runs phased, about 4–8+ weeks |
| Price guide | HDPE from approx. SAR 100/m² · PVC from approx. SAR 150/m², installed, excl. VAT |
| Installation time | Villa 1–2 cars: 1–2 days on site · 10–20 bays: about 2–4 weeks including footing cure |
01
One smooth arch design roof over your whole row

Picture a long, shallow tunnel roof over your cars. We roll steel arches to a curve in our workshop, set them on columns at regular intervals and link them with purlins along the row. Then we stretch the fabric over the arches in long panels, so your roof reads as one smooth curve from end to end.
That is what makes it different from a pyramid shade, which is built as separate four-sided modules. If you prefer an individual curved dome over each bay, look at our pyramid arch design parking shades. To compare every structure side by side, see our types of car parking shades guide.
Arch layouts we can build for you
- Two-sided arch: columns on both sides of the bays with the arch spanning between them, the most economical way to cover a wide span.
- Arch with columns on one side: the curved roof is carried from a single column line, leaving one side open for car doors, like a curved cantilever car parking shade.
- Back-to-back arch rows: two rows of bays under a pair of arches sharing a central column line, for large car parks.
- Arched walkway: the same structure, narrower, linking your car park to the building entrance.
02
What you get with Umbrella Parking Shades
- Free site visit: we measure your full row, record kerbs, lights and drainage, and advise on span, fabric and colour.
- Drawing and quotation first: a layout drawing and a clear written quotation before you pay anything.
- Arches that match perfectly: every arch is rolled in our Dammam workshop and checked against one template, so your roofline is smooth from end to end.
- Our own installation crews: no subcontractors, from footings to the last fabric panel.
- Warranty: 10 years on the steel structure and 5–10 years on the fabric.
- Balady permit support: we prepare the shade drawings and work with a licensed engineering office to file the permit when your site needs one.
- After-care: annual maintenance plans from SAR 500/year, including washing, re-tensioning and fabric replacement.
03
Why an arched roof works so well in Saudi weather

- Rain and sand slide straight off. A curved roof has no flat spots, so rain runs to the edges and blown sand does not settle. That helps in Jazan and the Asir highlands, where heavy rain comes in short bursts, and in Riyadh and Qassim, where dust storms are frequent.
- Long, unbroken cover. One continuous roof suits rows of 10, 20 or more cars, without the repeating peaks of a pyramid layout.
- A strong, quiet shape. An arch carries load through its curve, and tensioned fabric over a curve stays taut and quiet in wind.
- Gutters where you need them. Water collects along predictable edges, so gutters and downpipes can be added where run-off must be controlled.
What we tell you honestly: rolling arches adds workshop steps, and a continuous roof is harder to extend piece by piece than separate pyramid modules. On a very short run, a single pyramid or cantilever may cost you less, and we will price it for you.
04
Arched car park shades designed for your site
- Industrial and utility sites in Jubail and Yanbu, with long staff car parks, where we use hot-dip galvanised steel against humid, salty air.
- Hospitals and universities in Riyadh and Madinah, for long rows of staff parking and shaded paths to the entrance.
- Corporate campuses in Dhahran and Al Khobar, where a clean roofline suits modern buildings.
- Schools in Jeddah and Makkah, covering bus bays and parent drop-off lanes.
05
How we handle your project from survey to handover

- Free site survey. We measure the full length and width of the area, record kerbs, lighting poles and drainage, and confirm vehicle heights.
- Engineering and quotation. Our engineers choose the arch radius, span and spacing, select the steel sections, and design concrete footings and anchor bolts for SBC 301 wind loads at your site. You approve the layout drawing and written quotation before fabrication.
- Fabrication. In our Dammam workshop the arches are rolled to radius, checked against the template, welded and finished. Fabric panels are cut and joined to length.
- Installation. Our crews cast the footings and let them cure, set out the columns in a straight line, lift the arches, fix the purlins and tension the fabric panel by panel.
- Permit and handover. Where your site needs a Balady permit, we prepare the shade drawings with a licensed engineering office; at handover we explain the warranty and care.
06
Fabric and colour for a roof people notice
- PVC (from approx. SAR 150/m²) turns the arch into a waterproof roof with full shade, the right choice where rain cover matters, such as walkways and drop-off zones. See our PVC car parking shades for details.
- HDPE (from approx. SAR 100/m²) lets hot air escape through the fabric and blocks up to 95% of UV, keeping a long car park noticeably cooler in summer at the most economical price.
- PTFE is our premium membrane for high-profile buildings, quoted per project.
A long arched roof is very visible, so colour matters. White and light grey make the structure look lighter and reflect heat; green or blue can tie the shade to your company branding; in dusty inland cities, mid-tones hide dirt between cleanings. You choose from 12 colours.
07
Easy care that keeps your arch looking new

- Wash the fabric along its full length a few times a year; dust builds up where the curve flattens near the edges.
- Check the joins between fabric panels and the edge tension after windy periods.
- Clear gutters and downpipes before the rainy season, if fitted.
- Inspect column bases and arch connections once a year, and repair any coating damage quickly near the coast.
Our annual maintenance plans (from SAR 500/year) cover all of this, so your team does not have to.
08
We install across Saudi Arabia
Our workshop and office are in Dammam (King Saud St, Al Faiha, 32441; open Saturday to Thursday, 7 am to 10 pm), and our teams install in every region: the Eastern Province (Dammam, Al Khobar, Dhahran, Jubail, Hofuf), Riyadh, Qassim, Jeddah, Makkah, Madinah, Yanbu, Taif, Jazan, Abha and Tabuk. See our full coverage on the car parking shades in Saudi Arabia page.
09
Experience you can check

We have more than 25 years of experience in the Kingdom and are a Saudi Aramco approved vendor (Vendor ID 10114822) and a STAR Verified Contractor. Our car park shade work includes SABIC in Jubail, the SWCC station in Yanbu, Jazan Sea Port offices, King Abdulaziz Port in Dammam, Manarat Jeddah School (80 buses) and Al Qunfudhah market (150 parking spots).
10
What shapes the price of your arch design car parking shades
Your written quotation shows each of these clearly
- Span: a wider arch needs a heavier section and bigger footings.
- Run length: longer rows lower your cost per bay, and large projects get volume pricing.
- Column layout: a one-sided arch needs heavier columns and footings than a two-sided one.
- Fabric: HDPE from approx. SAR 100/m², PVC from approx. SAR 150/m², PTFE quoted per project.
- Steel finish: hot-dip galvanising costs more but is the right choice near the sea.
- Extras: gutters, lighting provisions and site work such as cutting asphalt.
Why Umbrella Parking Shades
- Saudi Aramco approvedVendor ID 10114822
- 25+ yearsShade structures in KSA
- Own fabricationWorkshop in Dammam
- Nationwide teamsAll 13 regions
Talk to a shade expert
Send your site photo or location — we reply with a layout and quotation.
WhatsApp +966 55 017 1295 Call +966 58 317 7864 Request a quoteAreas we serve
Umbrella Parking Shades
Project photos
Arch Design Car Parking Shades — our work in pictures
Real arch design car parking shades built and installed by Umbrella Parking Shades in Saudi Arabia. Tap a photo to enlarge it.
FAQ
Arch Design Car Parking Shades: frequently asked questions
Free site survey & quotation
Ready to start your arch design car parking shades project?
Send your location and number of cars on WhatsApp, or call us. Umbrella Parking Shades will visit your site and send a layout with the quotation.











